Filter
Top Products
6-16
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Working with Service Element Profiles
Table 6-4 lists the configurable attributes for a Cisco 6100/6130 DSL physical port profile. Attributes
with an asterisk "*" next to their Default Value indicates that these fields should not be changed.
Table 6-4 Cisco 6100/6130 DSL Physical Port Profile Attributes
Attribute Description Acceptable Values Default Value
Common Attributes
Name The DSL physical port profile
name.
Text string (up to 24
characters)
Customer The customer name. Text string (up to 16
characters)
Domain The domain name. Text string (up to 16
characters)
Port Type The DSL physical port type. SDSL, ADSL ADSL
Subscriber ID The subscriber ID for this physical
port object.
Text string (up to 32
characters)
Class The CPC class name for this
physical port.
C1dp C1dp*
Service Object
ID
The Service Object identification
number that owns this port.
Text string (up to 44
characters)
*
Protocol The protocol supported by this
physical port.
DSL DSL*
Incoming
Bandwidth
(kbits/s)
1
Specify the provisioned incoming
bandwidth.
0-2147483647 0
Outgoing
Bandwidth
(kbits/s)
1
Specify the provisioned outgoing
bandwidth.
0-2147483647 0
AZ
signal-to-ratio
margin
The AZ signal-to-noise-ratio
margin. The higher this margin is
set, the more protection there is
against data corruption. Higher
margins support lower data rates
for the given loop.
0-120 60
ZA
signal-to-ratio
margin
The ZA signal-to-noise ratio
margin. The higher this margin is
set, the more protection there is
against data corruption. Higher
margins support lower data rates
for a given loop.
0-120 30
Rate adaptation
mode
Specify the rate adaptation mode
for the physical port.
Startup, Fixed,
Dynamic
Startup