Filter
Top Products
6-5
Cisco Provisioning Center User’s Guide
78-11339-01
Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module
Initial System Upload
Before You Upload: Creating a Network Object
One network object must be created for each network. The following steps explain how to create a
network object.
Step 1 From the Root Tree Viewer choose Network Admin > IntraNetworking > Cisco NI1 DSLAM
Network.
Step 2 Click the Object Viewer button on the toolbar.
Step 3 Enter the attribute values under the Common Attributes and Common Parameters tabs. Refer to
Table 6-2 for attribute information.
Step 4 Save and apply the network object by clicking the Save and Apply buttons.
Table 6-2 lists the attributes for a Cisco 6100/6130 network object. Attributes with an asterisk "*" next
to their Default Value indicates that these fields cannot be changed.
Table 6-2 Cisco 6100/6130 Network Object Attributes
Attribute Description Acceptable
Values
Default Value
Common Attributes
Name The network name. (Mandatory) Text string (up to
64 characters)
Customer The customer name. Text string (up to
16 characters)
Domain The domain name. Text string (up to
16 characters)
Common Parameters
Containing Network This is the name of the network of
which this network object is a
subnet (optional).
Text string (up to
32 characters)
Transit Cost This is the cost of crossing the
sub-network. This attribute is used
by the Threader to determine the
lowest cost path when threading a
service. (Mandatory)
0-2147483647 500
Class The CPC class name for the
network object.
C1nt*
Opaque The threading strategy (opaque or
transparent).
True, False False*
Use Backup EMS Specify whether or not to use a
backup EMS. Disabled (False) to
use the primary EMS. Enable (True)
to use the backup EMS.
True, False False*