Filter
Top Products
Index
IN-62
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
groups supported 30-2
overview 30-2
statistics
collecting group Ethernet
30-6
collecting group history 30-5
support for 1-16
root guard
described
20-10
enabling 20-18
support for 1-8
root switch
MSTP
19-19
STP 18-16
route calculation timers, OSPF 38-33
route dampening, BGP 38-63
routed packets, ACLs on 34-40
routed ports
configuring
38-5
defined 12-4
in switch clusters 6-9
IP addresses on 12-26, 38-5
route-map command 38-101
route maps
BGP
38-55
policy-based routing 38-98
router ACLs
defined
34-2
types of 34-4
route reflectors, BGP 38-62
router ID, OSPF 38-34
route selection, BGP 38-53
route summarization, OSPF 38-32
route targets, VPN 38-78
routing
default
38-3
dynamic 38-3
redistribution of information 38-94
static 38-3
routing domain confederation, BGP 38-62
Routing Information Protocol
See RIP
routing protocol administrative distances
38-93
RPS
See Cisco Redundant Power System 2300
RPS 2300
See Cisco Redundant Power System 2300
RSPAN
and stack changes
29-10
characteristics 29-9
configuration guidelines 29-17
default configuration 29-11
defined 29-3
destination ports 29-8
displaying status 29-24
in a switch stack 29-3
interaction with other features 29-9
monitored ports 29-6
monitoring ports 29-8
overview 1-16, 29-1
received traffic 29-5
session limits 29-11
sessions
creating
29-18
defined 29-4
limiting source traffic to specific VLANs 29-23
specifying monitored ports 29-18
with ingress traffic enabled 29-22
source ports 29-6
transmitted traffic 29-6
VLAN-based 29-7
RSTP
active topology
19-10
BPDU
format
19-13
processing 19-14
designated port, defined 19-10
designated switch, defined 19-10
interoperability with IEEE 802.1D