Filter
Top Products
Contents
xli
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
Default MSDP Configuration 47-4
Configuring a Default MSDP Peer 47-4
Caching Source-Active State 47-6
Requesting Source Information from an MSDP Peer 47-8
Controlling Source Information that Your Switch Originates 47-8
Redistributing Sources 47-9
Filtering Source-Active Request Messages 47-10
Controlling Source Information that Your Switch Forwards 47-11
Using a Filter 47-12
Using TTL to Limit the Multicast Data Sent in SA Messages 47-13
Controlling Source Information that Your Switch Receives 47-13
Configuring an MSDP Mesh Group 47-15
Shutting Down an MSDP Peer 47-15
Including a Bordering PIM Dense-Mode Region in MSDP 47-16
Configuring an Originating Address other than the RP Address 47-17
Monitoring and Maintaining MSDP 47-18
CHAPTER
48 Configuring Fallback Bridging 48-1
Understanding Fallback Bridging 48-1
Fallback Bridging Overview 48-1
Fallback Bridging and Switch Stacks 48-3
Configuring Fallback Bridging 48-3
Default Fallback Bridging Configuration 48-4
Fallback Bridging Configuration Guidelines 48-4
Creating a Bridge Group 48-4
Adjusting Spanning-Tree Parameters 48-6
Changing the VLAN-Bridge Spanning-Tree Priority 48-6
Changing the Interface Priority 48-7
Assigning a Path Cost 48-7
Adjusting BPDU Intervals 48-8
Disabling the Spanning Tree on an Interface 48-10
Monitoring and Maintaining Fallback Bridging 48-11
CHAPTER
49 Troubleshooting 49-1
Recovering from a Software Failure 49-2
Recovering from a Lost or Forgotten Password 49-3
Procedure with Password Recovery Enabled 49-4
Procedure with Password Recovery Disabled 49-6
Preventing Switch Stack Problems 49-8