30-3
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
Chapter 30 Configuring RMON
Configuring RMON
Configuring RMON
These sections contain this configuration information:
• Default RMON Configuration, page 30-3
• Configuring RMON Alarms and Events, page 30-3 (required)
• Collecting Group History Statistics on an Interface, page 30-5 (optional)
• Collecting Group Ethernet Statistics on an Interface, page 30-6 (optional)
Default RMON Configuration
RMON is disabled by default; no alarms or events are configured.
Configuring RMON Alarms and Events
You can configure your switch for RMON by using the command-line interface (CLI) or an
SNMP-compatible network management station. We recommend that you use a generic RMON console
application on the network management station (NMS) to take advantage of the RMON network
management capabilities. You must also configure SNMP on the switch to access RMON MIB objects.
For more information, see Chapter 32, “Configuring SNMP.”
Note 64-bit counters are not supported for RMON alarms.