Filter
Top Products
Installing the Camera Software
Moving the Camera to Another Network
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 33
5
To move the camera from a wireless network to a wired network, follow these
steps:
STEP 1 Unplug the power adapter from the camera.
STEP 2 Connect the Ethernet network cable to your PC, router, or switch.
STEP 3 Connect the other end of the cable to the Ethernet port on the camera.
STEP 4 Re-connect the power adapter to the Power port on the camera. The camera’s
Ready LED flashes while the camera is initializing. The camera is ready for use
when the Ready and Network LEDs are solidly lit.