Filter
Top Products
Configuring the PVC2300 and WVC2300 Cameras
Applications > Event
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 72
8
- Enable SMB/CIFS—Check the box to enable SMB/CIFS alerts. Alerts
are recorded and sent to the NAS device (SMB/CIFS server).
- Upload Path—Enter the folder name to upload alert notification to a
NAS device (SMB/CIFS server).
- Login Name—Enter the user’s login name for the NAS device
(SMB/CIFS server).
- Password—Enter the user password for the NAS device
(SMB/CIFS server).
- Output 1/2—If checked, the output port(s) state will be activated when
an alert is detected. Output port(s) alerts require pre-configured I/O port
setting in the Applications > I/O Ports window. See “Applications > I/O
Ports” on page 75.
- Instant Messaging—If checked, an instant message will be delivered to
the Jabber server when an alert is detected. Jabber alerts require pre-
configured Jabber settings in the Applications > Instant Messaging
window. See “Applications > Instant Messaging” on page 67.
Event Attachment
When trigger events are enabled and an e-mail or FTP action is selected, the
following options are enabled:
• Overwrite/Replace oldest video file—Check the box to overwrite and
replace the oldest video clip with the current recording when detecting
device’s SDRAM is full.
• Attachment Type—From the drop-down list, select the type of attachment:
- JPEG Image—Select to send image captures.
- Frame Rate—Select the desired capture rate for the JPEG image(s).
- Pre/Post Capture—Select the desired length. The snapshot(s) of the
JPEG image depends on this setting, and also the file size and degree
of compression.
• Video—Select to send video captures.