Filter
Top Products
Configuring the PVC2300 and WVC2300 Cameras
Applications > FTP
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 65
8
Applications > FTP
From the Applications > FTP window, you can configure a primary and secondary
FTP server.
NOTE Only one FTP server is used, even if both the primary and secondary FTP servers
are enabled. The secondary FTP server is used if the camera cannot connect to the
primary server.
Primary FTP
• Primary FTP—Check the check box to upload to the primary FTP server.
• FTP Server—Enter the address of the primary FTP server. You can use the
IP address or the domain name.
• Port—Enter the port number for the primary FTP server. The default is 21.
• Login Name—Enter the login name associated with the specified primary
FTP server.
• Password—Enter the password associated with the login name for the
primary FTP server.
• File Path Name—Enter the desired file path name on the primary FTP
server.
• Enable Passive Mode—Check the box to enable the passive mode feature.
Passive mode is a more secure form of data transfer. The use of passive
FTP ensures all data flow initiation comes from inside the network rather
than from the outside.
Secondary FTP
• Secondary FTP—Check the check box to enable. When enabled, the
camera will connect to a secondary FTP server if the primary FTP server is
not available
• FTP Server—Enter the address of the secondary FTP server.
• Port—Enter the port number for the secondary FTP server. The default is
21.