Filter
Top Products
Sample Configurations
Using Patrol Sequence
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 88
9
Using Patrol Sequence
Patrol sequence determines how the camera will move when it is set to rotate. You
can set a number of preset positions. The camera will go to the first position, then
move through the list of preset positions until it is finished.The camera will stop at
the last position on the list.
To create the patrol sequence, follow these steps:
STEP 1 Click Setup in the toolbar.
STEP 2 Click Applications > RS-485. The Applications > RS-485 window displays.
STEP 3 To enable RS485, check the Enable RS485 check box.
STEP 4 In Patrol Sequence, select the desired Preset in the left column and click the
Add>>. Repeat until the desired sequence is complete.
You can add the same preset position more than once to make the camera stay
longer in one position.
STEP 5 Click Save.