Filter
Top Products
15
Chapter 1 Setup
1
3
4
5
2
1
Large blue-head open lever
The head unit can be raised to install media by pushing this lever.
It locks the head unit during printing.
2
Media width adjustment dial
It is adjusted to match the width of the media.
3
Media thickness adjustment dial
It is adjusted to match the thickness of the media.
4
Front (winding side) ribbon tension adjustment knob
This is adjusted according to the width of the ribbon that is used. It is
also used when the ribbon is wrinkled or slips.
5
Front (winding side) ribbon left-right balance adjustment
knob
It is used to perform an adjustment when the ribbon is wrinkled.
Normally set it to the center position.
Media Width Adjustment
(p.60)
Media Thickness Adjustment
(p.59)
Ribbon Tension Adjustment
(p.61)
Ribbon Balance Adjustment
(p.63)
Part Names and Functions