Filter
Top Products
52
Chapter 2 Printer Operation
Quick Setup of the Print Method
The print method (thermal transfer method/direct thermal method) can
be set using operation panel in addition to Menu Setup mode.
Setting method
Keep the Feed key held down. Each time the Pause key is pushed, the
printer switches between thermal transfer mode and direct thermal
mode.
Hold Press/Release
If thermal transfer is selected, the buzzer sounds once and the LCD
briey displays “Print Method, TT” before returning Ready status.
If direct thermal is selected, the buzzer sounds twice and the LCD
briey displays “Print Method, DT” before returning Ready status.
Note: Changes will remain in eect even after the power is turned o.
Be sure to always shut o the operation of print before changing a
setting. You cannot change a setting during printing (including pause).
Caution
Menu Setup Mode (p.35)