Filter
Top Products
P
RESARIO
N
OTEBOOK
B
EYOND
S
ETUP
G
UIDE
U
SING
Y
OUR
N
OTEBOOK
3-13
1800 S
ERIES
Security
In this section:
• Using the Security Slot
• Power-On Password
Pressing the F9 key at any
point within the setup returns
your Notebook to the default
settings.
Using the Security Slot
To use the security slot found on
the rear corner of your Notebook,
complete the following steps:
1. Insert a locking device (such as
a Kensington lock) into the
security slot.
2. Turn the locking device clockwise 90 degrees.
To remove the locking device, turn the locking device counter-
clockwise 90 degrees and remove the device from the slot.
Power-On Password
You can set a power-on password that
will secure the information you store on
the hard disk. When turning on your
Notebook, this password must be entered
before you can access your files.
Setting the Password
To set the power-on password, complete the following steps:
1. Press the Power button to turn on your Notebook.
2. After the Compaq logo is displayed, a cursor is shown in the
upper right corner of the screen for a few seconds. While the
cursor is visible, press the F10 key.
<
Caution: F10 Setup is for experienced users only. Changing
settings may affect the functionality of your Notebook.
3. Using your arrow keys, select the Security option from the
menu bar.
4. Move to Set Supervisor Password. Press the Enter key.