Submenu
101
Font Set
This parameter allows you to select a font for the IGP/VGL feature. The
default is 0, which is U.S. ASCII. The following values are valid choices:
0 U.S. ASCII
1German
2 Swedish
3Danish
4 Norwegian
5Finnish
6 English
7Dutch
8 French
9 Spanish
10 Italian
11 Turkish
32 Code Page 437
33 Code Page 850
Values 12-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the User Set command in the IGP/VGL Programmer’s
Reference Guide.
PI Control
Printer PI
• Disable. The ASCII emulation is configured with the PI line disabled.
• Enable. The ASCII emulation is configured with the PI line enabled.
Host PI
• Disable. The host does not send PI signals.
• Enable. The host sends PI signals. The Data Bit 8 configuration option
must be disabled to transmit the PI line to the printer.
Max PI 16
• Enable. A paper slew of 0-15 will move 1-16 lines.
• Disable. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will
always move 1 line.