Filter
Top Products
Load the Paper
43
Figure 34. Horizontal Adjustment Knob
8. After both tractors are secured, you may use the horizontal adjustment
knob to make fine horizontal paper adjustments.
Figure 35. Lowering the Forms Thickness Lever
9. Lower the forms thickness lever. Set it to match the paper thickness.
The A-B-C scale corresponds approximately to 1-, 3-, and 6-part paper
thickness. Adjust until you have the desired print quality.
NOTE: Do not set the forms thickness lever too tightly; excessive friction can
cause paper jams, ribbon jams with potential for ribbon damage,
smeared ink, or wavy print.
10. For cabinet models, close the cabinet front door.
11. Continue on to the next section to power on the printer.
Horizontal
Adjustment
Knob
A
B
C
Thin Paper
Medium Paper
Thick Paper