Filter
Top Products
Connect the Interface and Power Cables
35
Figure 21. Interface and Power Locations
1. Make sure the printer power switch is set to OFF (see Figure 21).
Connect the (customer-supplied) interface cable from the host computer
to the appropriate printer interface connector (see Figure 20). Refer to
Chapter 5, “Interfaces,” for descriptions of the connectors and their pin
assignments.
a. Remove the cover from the interface connector you have selected.
b. Hold the interface cable below its connector, and gently attach the
cable connector to the printer interface connector.
2. Plug the power cord into the printer AC power connector, then into the AC
power outlet (see Figure 21).
I/O Cover
Host Interface
Connectors
AC Power
Connector
AC Power Cable
Cable-Routing
Notch (2)
Power Switch
AC Power Connector
Host Interface
Connectors
Cabinet Model Pedestal Model
OFF/ON