Filter
Top Products
Menu
71
Save Config.
This option allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change the
parameter settings for each new job.
The configurations are stored in memory, and will not be lost if you turn off the
printer. Configuration 0 is a factory-preset configuration, which cannot be
changed or saved. See page 55 for a fuller description and sample procedure.
The Protect Configs. parameter must be set to disable before you may save a
configuration. Once you save a configuration, the Protect Configs. parameter
automatically returns to enable.
Print Config.
This option is used to output a listing of various stored printer configurations. It
is recommended you store the configuration printouts in a safe place for quick
referral. See page 61 for a fuller description and sample procedure.
Delete Config.
You can delete one or all of your eight customized configurations. The Protect
Configs. parameter must be set to disable before you may delete a
configuration. Once you delete a configuration the Protect Configs. parameter
automatically returns to enable. Configuration 0 is a factory-preset
configuration and cannot be changed or deleted.
Power-Up Config.
You can specify which of the nine configurations (0-8) will be the power-up
configuration. The factory default for power-up is configuration 0. See page 65
for a fuller description and sample procedure.
Protect Configs.
The default for this function is always enable. To save or delete a
configuration, you must first set this option to disable. After saving or deleting
a configuration, this option automatically returns to enable.