Filter
Top Products
Submenu
89
IGP/PGL Emulation
The IGP/PGL emulation can be configured either through the printer’s front
panel or from the host computer with control codes. For a detailed description
of configuration with control codes, see the DEC LG Emulation IGP/PGL
Programmer’s Reference Manual. For information on configuring the
emulation through the printer’s front panel, see the submenu below and the
parameter descriptions that follow.
Submenu
EMULATION
(from page 73)
Define CR
Code
Define LF
Code
Autowrap
Select SFCC
PI Slew Range
CR Edit
Select Font
Select LPI
Auto
Uppercase
Skip Cmd
Prefix
Power On
IGP/PGL
CR = CR*
CR = CR + LF
LF = LF*
LF = CR + LF
Disable*
Enable
126*
(1-255)
16*
15
Disable*
Enable
0-33
6*
8, 9, 10
Disable*
Enable
Enable*
Disable
Enable*
Disable
* = Factory Default
Ext Execute
Copy
UPC
Descenders
Compressed
CPI
Ignore Char
IGP100
Compatbl.
Disable*
Enable
Always*
Never
Only with PDF
Disable*
Enable
Ignore Mode
Disable*
Enable
Select Char
0*
(0-255)
Disable*
Enable
Optimized
Ratio
Disable*
Enable
IGP/PGL