Filter
Top Products
• track ip route reachability – configures object tracking on the reachability of an
IPv4 route.
show track
Display information about tracked objects, including configuration, current tracked state (UP or DOWN),
and the clients which are tracking an object.
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-
name] | ip route [brief] [vrf vrf-name] | resolution | vrf vrf-
name [brief] | brief]
Parameters
object-id (OPTIONAL) Display information on the specified tracked
object. The range is 1 to 500.
interface (OPTIONAL) Display information on all tracked interfaces
(Layer 2 and IPv4 Layer 3).
ip route (OPTIONAL) Display information on all tracked IPv4 routes.
resolution (OPTIONAL) Display information on the configured
resolution values used to scale protocol-specific route
metrics. The range is 0 to 255.
brief (OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF
instance. The maximum is 32 characters. If you do not enter
a VRF name, information on the tracked objects from all
VRFs displays.
Command
Modes
EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage
Information
The following describes the show track command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type
slot/port, IP route
ip-address, IPv6
Displays the interface type and slot/port number or address
of the IPv4/IPv6 route that is being tracked.
Object Tracking
1043