Filter
Top Products
Parameters
interval Enter the keyword interval to set the wait time. The range
is from 5 to 120 seconds. The default is 5 seconds.
retry-times Enter the keywords retry-times to set the number of
times the request interval is extended until a CSNP is
received from the helping router. The range is from 1 to 10
attempts. The default is
1.
Defaults Refer to Parameters.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
graceful-restart t2
Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for
each database to synchronize.
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2 Enter the keywords level-1 or level-2 to identify the
database instance type to which the wait interval applies.
seconds Enter the gracefule-restart t2 time in seconds. The
range is from 5 to 120 seconds. The default is 30 seconds.
Defaults 30 seconds
Command
Modes
ROUTER ISIS
Intermediate System to Intermediate System (IS-IS)
861