Filter
Top Products
show environment
View S-Series and Z-Series system component status (for example, temperature or voltage).
Syntax show environment [all | fan | stack-unit unit-id | pem ]
Parameters
all Enter the keyword all to view all components.
fan Enter the keyword fan to view information on the fans. The
output of this command is chassis dependent.
stack-unit unit-
id
Enter the keyword stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 1.
pem Enter the keyword pem to view only information on power
entry modules.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 The output of the show environment fan command for
the S-Series is changed to display fan speeds instead of
showing the fan status as up or down.
Usage
Information
The following example shows the output of the show environment command.
Example (all)
Dell#show environment
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
---------------------------------------------------------------
---------------------
0 0 up up 6971 up 7072
0 1 up up 6971 up 7021
0 2 up up 7021 up 7021
Control and Monitoring
129