Filter
Top Products
ipv6 dhcp snooping verify mac-address
Configure to enable verify source mac-address against ipv6 DHCP packet mac address.
Syntax
[no] ipv6 dhcp snooping verify mac-address
To disable verify source mac-address against ipv6 DHCP packet mac address, use
the no ipv6 dhcp snooping verify mac-address command.
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
ip helper-address
Configures the destination broadcast address or the host address for DHCP server requests.
Syntax
ip helper-address [vrf vrf-name] ip-address
To disable the destination broadcast address or the host address for DHCP server
requests, use the ip helper-address [vrf vrf-name] ip-address
command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the
VRF through which the host address can be reached.
ip-address Enter an IP address through which the host address can be
reached.
Default Disabled.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series and Z-Series.
Dynamic Host Configuration Protocol (DHCP)
573