Filter
Top Products
distance ospf
Configure an OSPF distance metric for different types of routes.
S6000
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters
external dist3 (OPTIONAL) Enter the keyword external then a number to
specify a distance for external type 5 and 7 routes. The range
is from 1 to 255. The default is
110.
inter-area dist2 (OPTIONAL) Enter the keywords inter-area then a number
to specify a distance metric for routes between areas. The
range is from 1 to 255. The default is 110.
intra-area dist1 (OPTIONAL) Enter the keywords intra-area then a number
to specify a distance metric for all routes within an area. The
range is from 1 to 255. The default is
110.
Defaults
• external dist3 = 110
• inter-area dist2 = 110
• intra-area dist1 = 110
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)
1073