Filter
Top Products
clear ip igmp snooping groups
Clear snooping entries from the group cache table.
S6000
Syntax
clear ip igmp snooping groups [group-address interface |
interface]
Parameters
group-address (OPTIONAL) Enter the IP multicast group address in dotted
decimal format.
interface
interface
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on S-Series and Z–Series.
Usage
Information
IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
yield results.
debug ip igmp snooping
Enable debugging of IGMP snooping packets on interfaces and groups.
S6000
Syntax
debug ip igmp snooping [group address | interface]
• To disable debugging of IGMP snooping, use the no debug ip igmp
snooping [group address | interface] command.
• To disable all debugging, use the undebug all command.
Parameters
snooping Enter the keyword snooping to enable debugging of IGMP
snooping.
654
Internet Group Management Protocol (IGMP)