Filter
Top Products
Installing System Components | 103
4 Replace the three screws that secure the SAS mezzanine-card assembly
to the system-board assembly. See Figure 3-13.
5 Reconnect all the cables to the SAS mezzanine card.
6 Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 88.
7 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Removing the 10GbE Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Turn off the system, including any attached peripherals, and
disconnect the system from its electrical outlet.
2 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 87.
3 Disconnect all the cables from the 10GbE mezzanine card.
4 Remove the three screws that secure the 10GbE mezzanine-card
assembly. See Figure 3-15.
5 Lift the 10GbE mezzanine-card assembly away from the mezzanine-
card bridge board on the system board. See Figure 3-15.