Filter
Top Products
Installing System Components | 129
Figure 3-30. Removing and Installing the Lower Middle Plane
1 lower middle plane 2 screw (6)
3 stand-off on the chassis (2)
Installing the Middle Planes
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Place the lower middle plane into the chassis. Make sure that the two
stand-offs on the chassis are inserted through the slot on the lower
middle plane. See Figure 3-30.
2 Replace the screws that secure the lower middle plane to the chassis.
See Figure 3-30.
3 Connect all the cables to the lower middle plane.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.