Filter
Top Products
62 | Using the System Setup Program
Option Description
Hyper Terminal on remote side will be discontinued
when <Ctrl>+<S> key is pressed. But onboard NIC
PXE Option ROM Configuration is also set when
<Ctrl>+<S> key is pressed. Suggest user change the
“Setup Key St
roke” to <Ctrl>+<B> in PXE
OPROM Configuration. T
he Hyper Terminal on
remote side will be discontinued when <Ctrl>+<S>
key is pressed.
Redirection After BIOS
POST
(Always default)
Disabled: Turns off the redirection after POST.
Always: Redirection is always active. (Some operating
systems may not work if set to Always.)
Terminal Type
(ANSI default)
Select the target terminal type.
VT-UTF8 Combo Key
Support
(Enabled default)
Enables or disables VT-UTF8 combination key support
for ANSI/VT100 terminals.