Filter
Top Products
Using the System Setup Program | 61
Remote Access Configuration
Scroll to this item and press Enter to view the following screen:
Option Description
Remote Access
(Disabled default)
Select remote access type.
Serial Port Number
(COM1 default)
Select serial port for console redirection.
Make sure the selected port is enabled.
When “Serial Port Number” set to “COM2”, the
setting will support SOL.
Serial Port Mode
(115200 8,n,1 default)
Select serial port settings.
Flow Control
(None default)
Select flow control for console redirection.
When setting “Flow Control” to “Software”, the