Filter
Top Products
114 | Installing System Components
Figure 3-20. Replacing the System Battery
1 system battery 2 positive side of battery connector
3 retention clip 4 negative side of battery connector
7 Replace the system-board assembly. See “Installing a System-Board
Assembly” on page 88.
8 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
9 Enter the System Setup program to confirm that the battery is
operating properly. See “Using the System Setup Program” on page 26.
10 Enter the correct time and date in the System Setup program’s Time
and Date fields.
11 Exit the System Setup program.