Filter
Top Products
106 | Installing System Components
Mezzanine-Card Bridge Board
Removing the Mezzanine-Card Bridge Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Turn off the system, including any attached peripherals, and
disconnect the system from its electrical outlet.
2 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 87.
3 Remove the mezzanine card. See “Removing the SAS Mezzanine Card”
on page 101 and “Removing the 10GbE Mezzanine Card” on page 103.
4 Pull the mezzanine-card bridge board away from the mezzanine slot on
the system board. See Figure 3-17.
Figure 3-17. Removing and Installing the Mezzanine-Card Bridge Board
1 mezzanine slot 2 mezzanine-card bridge board