Filter
Top Products
Figure 9. Removing and installing the system cover
1. system cover 2. latch
3. latch release lock
Installing the system cover
1. Lift the latch on the cover.
2. Place the cover on the chassis and offset the cover slightly back so that it clears the chassis hooks
and lays flush on the chassis.
3. Press down the latch to move the cover into the closed position.
4. Rotate the latch release lock in a clockwise direction to secure the cover.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Inside system
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: Components that are hot-swappable are marked orange and touch points on the
components are marked blue.
37