Filter
Top Products
Figure 37. Removing and installing a processor
1. processor socket-release lever 2. pin 1 indicator
3. processor socket-release lever 4. processor shield
5. processor 6. ZIF socket
7. socket keys (4) 8. notches in processor (4)
NOTE: After removing the processor, place it in an antistatic container for reuse, return, or
temporary storage. Do not touch the bottom of the processor. Touch only the side edges of
the processor.
Installing processor
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: If you are installing a single processor, it must be installed in socket CPU1.
1. Before upgrading your system, download the latest system BIOS version from dell.com/support/
home
and follow the instructions included in the compressed download file to install the latest BIOS
version on your system.
NOTE: You can update the system BIOS using Dell Lifecycle Controller.
2. Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet. When disconnected from the power source, press and hold the power button for
three seconds to fully drain the system of stored power prior to removing the cover.
71