Filter
Top Products
Adding and Replacing Parts 115
d
Lift the center hinge cover on the right side first just enough to access the
flex-cable connector.
e
Using the pull-tab, disconnect the center-hinge-cover flex cable from the system
board connector.
Display
CAUTION: Before you perform the following procedures, read and follow the safety instructions at the
front of this document (see page 9).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
center hinge
cover
system board connector center-hinge-cover
flex cable and pull-tab
G2806bk2.book Page 115 Tuesday, May 25, 2004 8:48 AM