Filter
Top Products
Adding and Replacing Parts 119
4
Remove the keyboard:
a
Remove the two screws across the top of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be
careful when removing and handling the keyboard.
b
Lift up the keyboard and slide it forward.
c
Hold the keyboard up and slightly forward to allow access to the keyboard connector.
d
Pull up on the keyboard connector tab to disconnect the keyboard connector from the
system board.
NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the four tabs along the
front edge of the keyboard into the palm rest, and then secure the keyboard in place.
screws (2)
system board connector
keyboard
keyboard connector tab
G2806bk2.book Page 119 Tuesday, May 25, 2004 8:48 AM