118 Adding and Replacing Parts
www.dell.com | support.dell.com
Also, ensure that the antenna cables are not twisted and that they are lying flat in the antenna
cable clip.
Keyboard
CAUTION: Before you perform the following procedures, read and follow the safety instructions at the
front of this document (see page 9).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1
Follow the procedures in "Before You Begin" (see page 99).
2
Open the display.
3
Remove the center hinge cover (see page 113).
NOTE: You do not need to remove the left and right hinge covers.
display
antenna cables (2)
antenna cable clip
G2806bk2.book Page 118 Tuesday, May 25, 2004 8:48 AM