Filter
Top Products
Adding and Replacing Parts 121
Card with Bluetooth
®
Wireless Technology
CAUTION: Before you perform the following procedures, read and follow the safety instructions at the
front of this document (see page 9).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
1
Remove the battery (see page 42).
2
Open the card door.
3
Pull the module out of the compartment so that you can disconnect the card from its cable
and remove it from the computer.
card
card connector
card door
G2806bk2.book Page 121 Tuesday, May 25, 2004 8:48 AM