Filter
Top Products
116 Adding and Replacing Parts
www.dell.com | support.dell.com
1
Follow the procedures in "Before You Begin" (see page 99).
2
Turn the computer over and remove the four screws (two on each side) labeled "D" on the
bottom of the computer.
3
Turn the computer right-side up.
4
Remove the left, right, and center hinge covers (see page 113).
5
Disconnect the antennae cables (pull to separate the connectors).
6
Disconnect the display cable, using the pull-tab.
screws labeled "D" (4)
display cable
system board connector
display
antenna cables
(
2
)
G2806bk2.book Page 116 Tuesday, May 25, 2004 8:48 AM