Filter
Top Products
Adding and Replacing Parts 117
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside
the computer.
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already
installed.
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the hinge cover (see "Hinge Cover" on page 104).
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
3
Remove the card from its compartment in the computer.
a
With the front of the computer facing you, slide the card to the right.
b
Rotate the card toward the front of the computer.
c
Lift the card out of the computer.
4
Disconnect the card from the cable connector.
1 metal tab 2 card 3 cable connector
3
2
1