Filter
Top Products
118 Adding and Replacing Parts
Coin-Cell Battery
CAUTION: Before performing the following procedures, follow the safety instructions in your
Product
Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside
the computer.
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the hinge cover (see "Hinge Cover" on page 104).
3
Remove the keyboard (see "Keyboard" on page 105).
1 card 2 card connector 3 cable connector
3
21