Filter
Top Products
Adding and Replacing Parts 163
3
Connect the black antenna cable with a gray stripe to the connector labeled
"aux" (black triangle) and connect the white antenna cable with a gray stripe
to the connector labeled "main" (white triangle).
4
Secure unused antenna cables in the protective mylar sleeve.
5
Replace the cover and tighten the captive screws.
Removing a WPAN Card
1
Follow the procedures in "Before You Begin" on page 139.
2
Turn the computer over.
3
Loosen the captive screws on the cover of the Mini Card compartment and
remove the cover.
4
Disconnect the blue antenna cable from the
WPAN
card.
5
Release the
WPAN
card by pushing the metal securing tabs toward the back
of the computer until the card pops up slightly.
6
Lift the
WPAN card
out of its system board connector.
1 captive screws (2) 2 cover
1
2