Filter
Top Products
Installing and Configuring Hardware 45
Figure 4-4. Connecting Cables to the Controller
11
Replace the cover of the system. For more information on closing the
system, see your system’s
Hardware Owner’s Manual
.
12
Reconnect the power cables(s) and network cables, and turn on the system.
Installing the Transportable Battery Backup
Unit (TBBU) for PERC 6/E
This section describes the installation of the transportable battery backup
unit (TBBU) on the PERC 6/E.
CAUTION: The following procedure must be performed at an Electrostatic
Discharge (ESD)-safe workstation to meet the requirements of EIA-625 -
"Requirements For Handling Electrostatic Discharge Sensitive Devices."
The following procedure must be performed following the IPC-A-610 latest
revision ESD recommended practices.
1 cable 3 PERC 6/i adapter
2 connectory 4 memory module
3
1
2
Dell_PERC6.1_UG.book Page 45 Wednesday, April 15, 2009 4:18 PM