76 Installing the Drivers
Installing or Updating the NetWare Driver in an Existing NetWare
System
Perform the following steps to add the Novell NetWare driver to an existing
installation:
1
At the root prompt, type
hdetect
and press <Enter>.
The
Configuration Options
screen is displayed.
2
From the screen that displays, go to the
Storage Adapter
screen to install
the MegaRAID SAS driver.
3
Delete any existing RAID adapter listings.
4
Press <Insert> to add unlisted drivers.
5
Press <Insert> again.
A path is displayed.
6
Press <F3>.
7
Insert the driver diskette into the diskette drive, and press <Enter>.
The system finds the
.HAM
driver.
8
Press <Tab>.
9
Select the Driver Summary screen, and press <Enter>.
10
Continue the Novell NetWare installation procedure.
Dell_PERC6.1_UG.book Page 76 Wednesday, April 15, 2009 4:18 PM