Filter
Top Products
6 Message Reference
42
Run Mode
Value
Run Mode
Mnemonic
Protocols selected to run on the board
1 DTI Digital Trunk Interface only, no protocol software. This
mode does NOT require the use of a software license
button.
2 MTP2 MTP2 protocol only.
3 MTP MTP3 plus MTP2 protocols.
25 ISUP-S ISUP, small version, plus all MTP.
4 ISUP ISUP, regular version, plus all MTP.
5 ISUP-L ISUP, large version, plus all MTP.
26 TUP-S TUP, small version, plus all MTP.
6 TUP TUP, regular version, plus all MTP.
7 TUP-L TUP, large version, plus all MTP.
See section 2.3.2 Capacity for details of the capacity for modules running on
the DSI SPCI Boards.
Status Response
The confirmation message (if requested) indicates success by status of zero.
No status values indicating errors are defined.
6.2.3 Board Status Indication
Synopsis
Message sent to the application on completion of the reset and download
sequence or on detection of a board status event.
Format
MESSAGE HEADER
Field Name Meaning
type SSD_MSG_STATE_IND (0x06a0)
id
board_id
src SSD_TASK_ID (0x20)
dst
mgmt_id for SSD
rsp_req
0
hclass
0
status Event Type (see below)
err_info
0
len
0