Filter
Top Products
15–
S
UPPORTED DISPLAY CONFIGURATIONS
Supported display combinations
The SideCar MMS series supports any combination of digital DVI or analog VGA
connections.
A high-density LFH connector at the rear of the SideCar provides the display outputs.
(Two such connectors are supplied with the SideCar PlusFour MMS.)
A supplied Y-cable attaches to the LFH connector, supporting two displays
per Y-cable.
Each Y-cable has two DVI-I connectors to directly support
either DVI-D or DVI-I cables supplied with your display.
If your display has only a VGA cable, use the
supplied DVI-to-VGA adapters to convert the
DVI ends of the Y-cable to support VGA
connections.
Y-cable with dual DVI-I connectors
TV output is not supported by the SideCar MMS series except when the SideCar is attached via
a PCI interface to a desktop PC or notebook docking station.
Supported display combinations per Y-cable splitter include:
Up to two digital DVI displays (up to 1280 by 1024 resolution each)
Up to two analog VGA displays (up to 2048 by 1536 resolution each), using the supplied
VGA adapters attached to the Y-cable
A combination of one DVI display and one VGA display (using the DVI-to-VGA
adapter)
For complete display compatibility information, please see the Specifications section at the back
of this manual.