D-Link 18 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Authentication RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To configure the 802.1X User, click Security > 802.1X > Authentication RADIUS Server:
Figure 5 - 21. Authentication RADIUS Server window
This window displays the following information:
Parameter Description
Index
Choose the desired RADIUS server to configure: 1, 2 or 3.
IP Address
Set the RADIUS Server IP.
Authentic Port
(1-65535)
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
(1-65535)
Set the RADIUS account server(s) UDP port. The default port is 1813.
Timeout (1-255)
Enter the timeout value in seconds (1 to 255) the default value is 5.
Retransmit (1-255)
Set the retransmit value in seconds (1 to 255) the default value is 2.
Key
(Max. length 32 bytes)
Set the key the same as that of the RADIUS server. Maximum length of the entry is 32
bytes.
129