D-Link 18 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 5 - 34. Application's Authentication Settings window
The following parameters can be set:
Parameter Description
Application Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command Line
Interface) application, the Telnet application, SSH, and the WEB (HTTP) application.
Login Method List Using the pull-down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other
Method List configured by the user. See the Login Method Lists window, in this section, for
more information.
Enable Method List Using the pull-down menu, configure an application for normal login on the user level, utilizing
a previously configured method list. The user may use the default Method List or other
Method List configured by the user. See the Enable Method Lists window, in this section, for
more information
Click Apply to implement changes made.
Authentication Server Group
This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used
to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using
method lists. The user may define the type of server group by protocol or by previously defined server group. The
Switch has three built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight
authentications server hosts may be added to any particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group:
Figure 5 - 35. Authentication Server Group Settings window – Server Group List tab
The Switch has four built-in Authentication Server Groups that cannot be removed but can be modified.
141