Filter
Top Products
DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 233
Area Aggregation Configuration
Area Aggregation allows all of the routing information that may
be contained within an area to be aggregated into a summary
LSDB advertisement of just the network address and subnet
mask. This allows for a reduction in the volume of LSDB
advertisement traffic as well as a reduction in the memory
overhead in the switch used to maintain routing tables.
To configure OSPF Area Aggregation on the switch, click
the Area Aggregation Configuration link under the OSPF
folder:
Figure 6-42. OSPF Area Aggregation Configuration
The following fields can be set or are displayed:
Parameter Description
Area ID
Allows the entry the OSPF Area ID
for which the routing information will
be aggregated. This Area ID must be
previously defined on the switch.