Filter
Top Products
DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 277
interconnected the switches in the
switch stack.
Port Member
Allows the specification of the ports
that will make up the link
aggregation group.
State <Disabled>
This field can be toggled between
Enabled and Disabled. This is used
to turn a link aggregation group on
or off. This is useful for diagnostics,
to quickly isolate a bandwidth
intensive network device or to have
an absolute backup link aggregation
group that is not under automatic
control.
Utilities
TFTP Utilities
Trivial File Transfer Protocol (TFTP) services allow the switch
firmware to be upgraded by transferring a new firmware file
from a TFTP server to the switch. A configuration file can also
be loaded into the switch from a TFTP server, switch settings
can be saved to the TFTP server, and a history log can be
uploaded from the switch to the TFTP server.
Update Firmware from Server
To update the switch’s firmware, click on the Basic Setup
folder and then the Switch Utilities folder and then the