Filter
Top Products
12D-Link DAP-3410 User Manual
Section 2 - Installation
A. Connect the Ethernet cable that is connected to the AP from STEP 1 to the P+DATA OUT port on the PoE Injector.
B. Connect an Ethernet cable from a router, switch, or PC to the DATA IN port on the PoE Injector.
C. Attach the power adapter to the connector labeled POWER IN on the PoE Injector, and plug it into an electrical
outlet.
1
This product uses a proprietary PoE design and can only be used with the included PoE injector.
STEP 2: Connect the AP to Your Network
A
C
B
P+DATA OUT
DATA IN
PoE Injector
1
POWER IN
Router or Switch Computer
AP
LAN (PoE)
1