Filter
Top Products
43D-Link DAP-3410 User Manual
Section 3 - Conguration
Parental Control
Active:
Comment:
MAC Address:
Local IP:
Destination IP:
Protocol:
Local Port:
Destination
Port:
Select to either Disable or Enable the Parental
Control feature.
You can enter a comment here for each rule
that is created.
Enter the MAC address to be monitored and
click Save to add it to the parental control list.
Enter the start and end of an IP address
range that you would like to lter on the local
network. This is normally used to prevent
access to certain parts of the internal network.
Enter the start and end of an IP address range
that you would like to lter on the destination
network. This is normally used to prevent
access to certain parts of the external network.
Specify which protocol to lter.
Enter the specic port to lter on the local
network.
Enter the specic port to lter on the destination
network.
Parental Control is used to allow you to set up a range
of IP Addresses that can be either be blacklisted or
whitelisted to certain MAC addresses on the network.