Filter
Top Products
25D-Link DAP-3410 User Manual
Section 3 - Conguration
Advanced Settings
Performance
Wireless:
Wireless Mode:
Data Rate:
Beacon
Interval:
DTIM Interval
Use the drop-down menu to turn the wireless
function On or O.
The dierent combination of clients that can
be supported include Mixed 802.11n, and
802.11n Only.
Set the base transfer rate of wireless adapters
on the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. This option is enabled
in Mixed 802.11g and 802.11b mode. The
choices available are Best (Up to 54), 54, 48,
36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
Beacons are packets sent by an access point
to synchronize a wireless network. Specify
a value in milliseconds. The default (100)
is recommended. Setting a higher beacon
interval can help to save the power of wireless
clients, while setting a lower one can help a
wireless client connect to an access point faster.
Set a Delivery Traffic Indication Message
setting between 1 and 255. The default value
is 1. DTIM is a countdown informing clients of
the next window for listening to broadcast and
multicast messages.
This options on this page will allow you to ne tune the
wireless connectivity of the access point.